LIAS - Laser Warning Receiver System

LIAS is aa advanced threat warning system to detect, classify, identify and give warning of hostile laser threats aiming on the platform, in a very short time with high sensitivity. LlAS can activate the countermeasure systems available on the platform either directly or via a host computer.

LlAS is designed to detect almost all types of laser threats available in the world military inventory. Laser Range Finders (LRF), Laser Designators (LD) and Laser Beam Riders (LBR) threats operating on various optical bands can be detected by the system.

Thanks to the state-of-the-art technology, LlAS also delivers the threat alarms in a very short term which enables the pilot to employ the fastest counteraction and/or maneuver.

LlAS is comprised of one Processor Unit and 4 Sensor Units installed on the body of the platform. The open-architecture design of the system permits easy installation and integration on a helicopter or a transport aircraft.


    Detects Enemy Laser Threats
        Laser Range Finder (LRF)
        Laser Target Designator (LTD)
        Laser Beam Rider (LBR)

    Designed and Qualified for Airborne Platforms

General Specifications

    High Sensitivity

    Fast Response Time

    Threat Classification (LRF, LTD, LBR)
    Threat Identification and Prioritization

    (Via MDF-Mission Data File)
    High Resolution Direction of Arrival (DOA) Detection
    Detection of Pulsed and CW Modulated LBR
    Optional Band IV (8-12 µm) Wavelength Coverage
    360° Coverage in Azimuth
    High Probability of Detection (PoD)
    Very Low False Alarm Rate (FAR)
    Threat Wavelength Band Detection
    PRF (Pulse Repetition Frequency) Detection
    Threat Tracking
    Multiple Simultaneous Threat Detection and Tracking
    Multiple MDF Capability
    Data Recording Facility (Event and Pulse Parameters)

    For Post Processing
    Hardware and Software Blanking Interface
    Zeroize Input for Erasing the Critical Data From Memory
    CM (Counter-Measure) Activation Interface
    High MTBF Figure
    Interface to Host Computer
    Test Equipment for O-Level Maintenance

Technical Specifications    ​    ​
​    ​    ​
Wavelength Coverage    

Band I   : 0.5  µm to 1.1 µm

Band II  : 1.1  µm to 1.65 µm

Band III                : 0.8  µm to 1.1 µm

Band IV                : 8-12 µm (Optional)
Field of Regard   

Azimuth    : 360°

Elevation : > 80°
Direction of Arrival Accuracy    

Band I-II : ≤ ±1° (rms)

Band III   : ≤ ±10° (rms)

Band IV  : ≤ ±22.5° (rms)
Probability of Detection   

LRF (Band I-II-IV)             : ≥ %95

LD (Band I-II-IV) : ≥ %95

LBR (Band III-IV) : ≥ %99
Communication Interface   


Fast Ethernet (100Mbit)

Weight (kg)   

Processor Unit : < 3.75

Sensor Unit       : < 3.25
Size (mm)   

Processor Unit : < 162x102x195

Sensor Unit       : < 172x152x132
​    ​    ​
​    ​    ​
​    ​    ​
Environmental Conditions    ​     
Operating Temperature    -40°C to +60°C      
Storage Temperature    -55°C to +85°C      
Environmetal Spec   



Note: All tolerances are within ±10%. Specifications may change without prior notice.