ANS-510K Land Inertial Navigation System

​ANS-510K is an integrated position and attitude determination system for land vehicles. ANS-510K supplies linear acceleration, linear and angular velocity, position, attitude to the host vehicle systems continuously. ANS-510K has an open architecture and hardware/ software flexible unit which can be adapted to various land platforms.

ANS-510K consists of strapdown inertial measurement unit, system processor unit, power supply unit, Embedded GPS Receiver (EGR) and chassis. ANS-510K is capable of using 12 channel P(Y) coded SAASM GPS receiver or commercial SPS GPS receiver as embedded GPS receiver. ANS-510K is also capable of using external GPS receiver. The tightly coupled, embedded INS/GPS and integrated odometer mechanization of ANS-510K provides improved performance for land platforms.

ANS-510K provides a hybrid (inertial+GPS+Odometer) navigation solution, inertial only navigation solution and a GPS only navigation solution simultaneously. ANS-510K has the capability of providing high performance position and attitude with odometer update in case of lack of GPS signal.

Long mean time between failure (MTBF) and internal built in test capability reduces the logistics requirement to a minimum. ANS-510K does not require periodic maintenance.
Important Features
​General Specifications

    Embedded Military (SAASM) or Commercial (SPS) GPS receiver
    Hybrid, Free Inertial, GPS Only Navigation Solution
    Odometer Update                                                   E
    UTM or Geographical Position Calculation
    True, Grid or Magnetig Heading Calculation
    Position Update                                                     D
    Start-Up BIT, Periodic BIT
    Field Programmable Software
    No periodic maintanence

System Operational Modes

        Gyro Compass (GC) Alignment
        In Motion Alignment with Internal/External GPS
        Hybrid Navigation (HNAV)
        Inertial Navigation (INAV)
    Initiated Built In Test (IBIT)

System Interfaces

    MIL-STD-1275D Electrical Power Interface
    High speed RS422 Serial Test Interface
    RS422 Serial User Interface
    Spare RS422 Serial Interfaces
    External GPS Interface (ICD-GPS-153)
    Have Quick and 1PPS Interface (ICD-GPS-060)
    KYK–13 Interface
    Active and Passive RF Antenna Interface
    Discrete Interfaces

Navigation Performance (in compliance with MIL-PRF-71185)
     Horizontal Position (CEP)    Vertical Position (PE)
Inertial+ODO+GPS  (PPS)    10 m    10 m

Inertial + ODOmeter (with ZUPT every 60 minutes)

0.0025 x Distance travelled (Distance travelled

> 4 km)

0.00067 x Distance travelled (Distance travelled

> 10 km)

10 m (Distance travelled < 4 km)

6.7 m

(Distance travelled < 10 km)

Free Inertial

(with ZUPT every 4 minutes)

18 m

10 m

    1 mils RMS ( <0.2 mils RMS, with internal GPS )    ​

Roll, Pitch
    0.5 mils RMS ( <0.2 mils RMS, with internal GPS)    ​
Alignment Modes and Durations
Ground  Alignment Mode    GPS In-Flight Alignment Mode    Stored Heading Mode
15 min.    10 min.    30 sec.
Environmental Conditions


Electromagnetic Environmental Effects

    MIL-STD-461 / DO-160E

Dimensions and Weight

    ~ 26cm x 19cm x 15cm (including connectors)
    Less than 6.2 kg with GPS receiver installed